Log Home Stains log home finishes log home supplies, services and Log Home Restoration at Log Home Super Center

After Blast/Prelude

Home
Corn Cob Blasting
Staining
Chinking
Log Restoration
Company History
Photos
E-Mail

Sealants
Perma-Chink
Energy Seal
Stack-n-Seal
Check Mate
Chink-Paint

Stains & Finishes
Lifeline Ultra-1
Lifeline Ultra-2
Lifeline Exterior
Lifeline Advance
Lifeline Interior
Acrylic Gloss/Satin
Prelude/After Blast
Endure Deck Stain
Sure Shine
UV BOOST
Log End Seal

Preservatives
Shell-Guard
Shell-Guard RTU
Armor-Guard

Restoration
Products
M-Balm
E-Wood
Epoxy Kit

Wood Cleaners/Strippers
Wood ReNew
Log Wash
Eazy Strip
S-100
Oxcon

Dry-in Products
Trap Rod &
Backer Rod
Gasket Tape
Log Fasteners

Our Tools

After-Blast is a sealer/primer for wood surfaces that have been media blasted. After-Blast is enhanced with UV Boost for maximum protection against graying due to UV light exposure.

Over the past few years media blasting has become an excellent tool for removing old finishes in preparation for applying a new coat of stain.

However, media blasting significantly increases the porosity of the wood, thus allowing it to absorb much more stain than those wood surfaces that have been chemically stripped, sanded, or pressure washed.

This high absorption results in a darker final stain color than that typically reflected by a color chart. In addition, wood that is not uniform as a result of media blasting often emphasizes the differences in wood grain absorption, even on a single log. This can result in streaks and blotches due to varying amount of stain absorbed by different areas of the wood.

After-Blast solves many of the potential problems created by media blasting. One coat fills
the pores of the wood and provides a uniform surface film in preparation for the application
of a pigmented stain. However it should be noted that After-Blast is a sealer/primer and is
not suitable as a final finish! For use only with water-based LIFELINE brand stains.

Shelf Life	6 months
Application Temperature	40° to 90° Do not freeze!
Application Methods	Airless Sprayer Brush Back-brushing required
Surface Preparation	Clean and dry Free of mold and mildew Do not use steel wool
Frequency	Once as needed
Drying Time	Dry to the touch in 1 hour. Cures in 72 hours

Prelude/After-Blast Price List
1 gal (10 lb)	$ 37.50
5 gal (50 lb)	$ 155.00

After-Blast Price List
One Coat	200 - 400 square feet per gallon

To view and/or print MSDS sheets or labels you need Acrobat Reader. If you don't have Acrobat Reader installed on your computer, click here for a free download.

MSDS

After Blast Label

Place Your Order Today Please use the BUY NOW LINKS or E-Mail or Call our Ordering Line at 336-325-9986

Forms of Payment:
We accept MASTERCARD, VISA, DISCOVER CARD and AMERICAN EXPRESS.

Shipping:
We ship to your jobsite. All orders are shipped within 24 hours. Substantial freight discounts may occur on shipments weighing 200 pounds or more.
Orders accepted before noon are same day shipment.

Terms:
Prices effective July 14, 2008. Prices are subject to change without notice. All prices are in US dollars.
Seller not responsible for consequential damages. All returns require advance approval number and will be subject to 15% restocking charge.

Please check out our entire web site for more information on our Services and Products.
Our Goal is to provide #1 Customer Service and Top Quality Work

Corn Cob Blasting ~ Staining ~ Chinking ~ Log Restoration ~ Company History ~ How To ~ Sealants ~ Stains and Finishes
Preservatives ~ Restoration Products ~ Dry In Products ~ Photos ~ Our Tools ~ E-Mail ~