|
Photos
E-Mail
How to?
Application Guide
Sealants
Perma-Chink
Energy
Seal
Stack-n-Seal
Check
Mate
Chink-Paint
Stains & Finishes
Lifeline Ultra-1
Lifeline Ultra-2
Lifeline
Exterior
Lifeline
Advance
Lifeline
Interior
Acrylic
Gloss/Satin
Prelude/After Blast
Endure Deck Stain
Sure
Shine
UV BOOST
Log End
Seal
Preservatives
Shell-Guard
Shell-Guard RTU
Armor-Guard
Restoration
Products
M-Balm
E-Wood
Epoxy
Kit
Wood Cleaners/Strippers
Wood ReNew
Log Wash
Eazy Strip
S-100
Oxcon
Dry-in Products
Trap Rod &
Backer Rod
Gasket
Tape
Log Fasteners
Our Tools
|
|
E-WOOD
Epoxy Putty Wood Restoration System
E-Wood is a putty-like, non-shrinking, epoxy filler
used to fill in missing sections of logs or dimensional wood members.
E-Wood will form a permanent bond to most rigid surfaces. Porous surfaces
should always be treated with a compatible, low viscosity epoxy system
such as M-Balm.
Use E-Wood to replace
missing sections of window sills, frames, furniture, or any wood
structure. Use it to add new sections to completed structures.
After repair with E-Wood, restored wood can be shaped
with your normal wood working tools, including saws, sanders, planes,
routers and drills.
M-Balm and E-Wood Epoxy Wood Rot Repair Kit
As an alternative to wood replacement, Perma Chink has developed two
epoxy products to restore rotten wood. M-Balm
can restore the integrity to weak or spongy wood. E-Wood serves as wood
putty for rebuilding missing sections of logs, millwork, or other wood members.
Prior to use, treatment with Shell-Guard preservative is recommended to
halt the spread of dry-rot.
- With disposable gloves, combine E-Wood epoxy
and hardener. Do not mix more than can be applied in 15 minutes.
- Apply over
wood that has been treated and sealed with M-Balm. Mold to rough
finished shape.
- When cured, sand, nail, carve, paint
or stain as desired.
|
- Restores strength to deteriorated
wood.
- White vinegar and water
cleanup.
- Does not shrink.
- Can be sawed, drilled,
routed, nailed,
- screwed, painted and
stained.
Color is woodtone.
|
|
|
Shelf Life
|
|
|
Application Temperature
|
- 40o to 90o
- Do not freeze!
|
|
Application Methods
|
- By hand
- Putty knife or trowel
|
|
Surface Preparation
|
- Clean and dry
- Restored with M-BALM
|
|
Frequency
|
|
|
# of coats
|
|
|
Drying Time
|
|
|
E-WOOD
|
| 32-oz.bottle
(3 lb.) |
$
35.75 
|
| 32-oz.Case
12 (18 lb.) |
$ 385.00
|
| 2-gal.
pail (14 lb.) |
$ 165.00
|
Epoxy Kit M-Balm &
E-Wood 10 oz (1.5lb)
|
$
26.50
|
Epoxy Kit M-Balm & E-Wood 10 oz
CS 24 (26lb)
|
$ 520.00
|
Prices Effective April 1, 2008
|
|
Forms
of Payment:
We accept MASTERCARD, VISA,
DISCOVER CARD and AMERICAN EXPRESS.
Shipping:
We ship to your job
site. All orders are shipped within 24 hours. Substantial
freight discounts may occur on shipments weighing 200 pounds or
more. Orders accepted before noon are same day shipment.
Terms:
Prices effective April 1, 2008. Prices are subject to change without
notice. All prices are in US dollars. Seller not responsible
for consequential damages. All returns require advance approval
number and will be subject to 15% restocking charge.
|
|
|
