Log Home Supplies, Services, Corn Cob Blasting and Restoration at Log Home Super Center

UV BOOST

Home
Corn Cob Blasting
Staining
Chinking
Log Restoration
Company History
E-Mail

Sealants
Perma-Chink
Energy Seal
Stack-n-Seal
Check Mate 2
QSL
Chink-Paint

Stains & Finishes
Lifeline Ultra-1
Lifeline Ultra-2
Lifeline Exterior
Lifeline Advance
Lifeline Interior
Acrylic Gloss/Satin
Sure Shine
Endure Deck
UV BOOST
Stay Clean
Log End Seal
Prelude/After Blast

Preservatives
Shell-Guard
Shell-Guard RTU
Armor-Guard
Cobra Rods

Cleaners/Strippers
Wood ReNew
Log Wash
S-100
Eazy Strip
Oxcon

Restoration Products
M-Balm
E-Wood
Epoxy Kit

Dry-in Products
Trap Rod &
Backer Rod
Gasket Tape
Log Fasteners

Our Tools

We Thank you for visiting.

UV Boost
Additional Protection for high-exposure areas
Add UV Boost to the first coat of Lifeline finish for additional UV protection.
Developed for high UV exposure locations, it is also a recommended additive for clear interior finishes.
(Note: a full dose of UV Boost has already been added to Ultra 2, our premium exterior stain.)

Shelf Life	1 Year
Application Temperature	40^o to 90^o Do not freeze!
Special Instructions	Shake container of UV Boost Add entire contents to the appropriately sized full container of stain or finish Any stain containing UV Boost that is left over once the initial coat is applied may be used for subsequent coats. Just be sure to “box” the remaining stain to assure a uniform color

UV Boost Instructions

(Printer Friendly Version Here)

For use only in water-based stains and finishes produced by Perma-Chink Systems, Inc.

UV Boost provides an extra measure of protection against stain fading due to UV radiation in regions subject to high intensity sunlight.

UV Boost is only effective when used in the first coat of stain or finish applied to bare wood. It is not effective when added to topcoats or stains applied over an existing finish. UV Boost can be used in both interior and exterior applications. When used in the first coat of interior finishes it will reduce the “picture frame” effect on walls and floors.

Directions for Use

Shake container. Add the entire contents to a full appropriate size container of stain or finish. Shake or stir well after addition. Follow the labeled application directions for the stain or finish.

Additive for 5 Gal.

UV Boost Additive for 5 Gallon PailsWeight: 0.50 Lb.
Price: $19.00

Buy Now

Additive for 1 Gal.

UV Boost Additive for 1 Gallon ContainersWeight: 0.30 Lb.
$7.75

Buy Now

Forms of Payment:
We accept MASTERCARD, VISA, DISCOVER CARD and AMERICAN EXPRESS.

Shipping:
We ship to your jobsite. All orders are shipped within 24 hours. Substantial freight discounts may occur on shipments weighing 200 pounds or more.
Orders accepted before noon are same day shipment.

Terms:
Prices effective July 14, 2008. Prices are subject to change without notice.
All prices are in US dollars. Seller not responsible for consequential damages.
All returns require advance approval number and will be subject to 15% restocking charge.

Corn Cob Blasting ~ Staining ~ Chinking ~ Log Restoration ~ Company History ~ How To ~ Sealants ~ Stains and Finishes

Preservatives ~ Restoration Products ~ Dry In Products ~ Our Tools ~ E-Mail ~ Sashco Log Home Product Page

Shelf Life

1 Year

Application Temperature

40o to 90o Do not freeze!

Special Instructions

Shake container of UV Boost Add entire contents to the appropriately sized full container of stain or finish Any stain containing UV Boost that is left over once the initial coat is applied may be used for subsequent coats. Just be sure to “box” the remaining stain to assure a uniform color

40^o to 90^o

Do not freeze!

Shake container of UV Boost

Add entire contents to the appropriately sized full container of stain or finish

Any stain containing UV Boost that is left over once the initial coat is applied may be used for subsequent coats. Just be sure to “box” the remaining stain to assure a uniform color